Wire management strategy

StatusPlanned
CategoryElectrical
Wire management strategy
  • What: Clean up the 12V accessory wiring + the loose cable runs (see photos. daisy-chained feeds behind the socket panel, cables draped across the wall).
  • Plan:
  • One hub: replace daisy-chained socket feeds with a blade fuse block + ground bus (6-12 circuit). each socket/USB on its own fused, labeled circuit.
  • Route on edges: secure runs with adhesive cable-tie mounts / P-clips along cabinet edges + corners; keep split-loom on exposed spans (already have some). Nothing draped across open wall.
  • Separate power from data: 12V runs on one side, Starlink cable / coax on the other; leave a service loop at the roof entry.
  • Label both ends of every cable.
  • Need to buy: blade fuse block + ground bus (size to circuit count), assorted blade fuses, adhesive cable-tie mounts / P-clips, split-loom, ferrules/heat-shrink crimps, cable labels
  • Tools: drill ✅, crimpers (confirm have)
  • Check/measure: count accessory circuits (sizes the fuse block); measure run lengths for loom + wire; confirm I have crimpers/heat-shrink

Photos

Wire management strategy Wire management strategy

← All Build Journal